G14 Pneumatic or motorized, for medium to high viscosity products, up to 5 dosagesat once from 1-1000mm³
«Full volumetric» dispenser specially designed for extremely precise dispensing operations of low and high viscosity products (oil, grease, silicone, certain adhesives, soldering paste,…)
Can be fed by syringes, by DOSOMAT 900 /904, and also by barrel pumps.
Controlled movements. Modular System.
Pneumatic version to dispense drops, or motorized version (step by step or servo motor) for continuous dispensing operations.
Possibility to dispense at the same time different products and different volumes.
A better performances can be obtained using degassed products.
Technical data参数表
|
Model |
G14-1-PX |
G14-3 / 5PN |
|
Weight of Dispenser 重量 |
Approx. 约5.75kg |
Approx. 7kg |
|
Size of Base Plate 底座尺寸 |
222x75x12mm |
222x123x12mm |
|
Size for Grease Dosages 尺寸（用于油脂类） |
Approx. 约371.5x91x191mm |
Approx. 393x136x197mm |
|
Size for Oil-Dosages尺寸（用于油类） |
Approx. 约371.5x91x148mm |
Approx. 393x136x155mm |
|
Air Consumption per Cycle 每次消耗空气量 |
Ca. 0.251 |
Ca. 0.31 |
|
Working Frequency max (empty) 最快工作频率 |
Approx. 60 cycles/min 60次/分 |
Approx. 60 cycles/min 60次/分 |
|
Dispensing Duration at Max. Stroke点胶最大持续时长 |
Dependent upon the viscosity approx.1-6″ 根据粘度不同大约1-6'' |
Dependent upon the viscosity approx.0.1-0.3″ 根据粘度不同大约0.1-0.3'' |
|
Force of Cylinders 5 bar (without throttling) 气缸压力 5Bar（不用调压阀） |
620N /528N |
980N / 824N |
|
Proximity Switch for cylinders 气缸接近开关 |
Magnetic PNP, 10…30 V DC /100 mA PNP 10-30VDC/100mA |
Magnetic PNP, 10…30 V DC /100 mA PNP 10-30VDC/100mA |
|
Dispensing Plunger-φ for max dosage volume 点胶活塞直径 |
30mm³/2mm, 125mm³/4mm, 280mm³/6mm, 500mm³/8mm, 785mm³/10mm, 1131mm³/12mm |
|
Copyright ©2019 Weihai Automation International Trade Co., Ltd. All rights reserved.
Address: Room 1006, Block A, No. 177, Wenhua West Road, Weihai, Shandong, China Tel: 0631- 5677081 Fax: 0631-5675281
鲁ICP备10202040号-1 Website: www.whautomation.com E-mail:sales@whautomation.com
