DOSOMAT 500 – 700
« Time / pressure » dispensing device set specially designed for low or high viscosity products. To be used manually. Particularly adapted to dispense oil (in very low quantities), grease and all other viscous products with the exception of adhesives. Proposed with different sizes of syringes from 1 to 100 cm3. Exchangeable and refillable. Minimum dosage: 0.05 mm3.Pulsed or continuous functioning mode to enable the dispensing operation of dropsor stripes. To be used with degassed products in order to obtain the best performances.
Controller. E880 is used with the dispensing units.
Technical data参数表
|
Dosomat |
500/504* |
600/604* |
650 |
670 |
700 |
|
Contents cm³ 容量 |
1 |
7.5 |
15 |
37 |
100 |
|
Lowest Volume mm³ 最小容量 |
0.05 |
0.1 |
0.2 |
0.5 |
0.5 |
|
Syringe Dimensions mm针筒尺寸 |
Φ8x130 |
Φ18x150 |
Φ23x200 |
Φ27x240 |
Φ48x300 |
|
Control Dimensions mm 控制器尺寸 |
199x223x75 |
199x223x75 |
199x223x75 |
199x223x75 |
199x223x75 |
Copyright ©2019 Weihai Orey Info Technology Co., Ltd All rights reserved.
Address: Room 2205, Building A, No.177, West Wenhua Road
WEIHAI 264206 SHANDONG CHINA Tel: 0631- 5677081 Fax: 0631-5675281
鲁ICP备2024134097号-1 Website: www.whautomation.com E-mail:sales@whautomation.com
