TP
FLOW FUNCTION DISPENSING HEADS TYPE TP
Pneumatically actuated dispensing systems for both low viscosity and high viscosity products. The amount of product delivered dependent on 3 parameters:
– The opening time
– The product inlet pressure
– The aperture diameter
Remarks
– Dispenses point by point or continuously
Dispensing products continuously may be influenced by fluctuation in the temperature of the product.
Controller E880 is used to control TP.
Technical data参数表
|
Model |
Min Pulse Time 最短点胶时长 |
Max Pulse Time 最长点胶时长 |
Medium Inlet Thread 进料口螺纹 |
Weight 重量 |
Size 尺寸 |
Nominal φ 标配直径 |
|
TP-2 |
0.05 sec |
9.99sec |
G3/8″ |
0.4kg |
40x40x144mm |
2mm |
|
TP-6 |
0.05 sec |
9.99sec |
G3/8″ |
0.9kg |
45x45x186mm |
6mm |
|
TP-10 |
0.05 sec |
9.99sec |
G3/8″ |
0.9kg |
45x45x211mm |
10mm |
Copyright ©2019 Weihai Orey Info Technology Co., Ltd All rights reserved.
Address: Room 2205, Building A, No.177, West Wenhua Road
WEIHAI 264206 SHANDONG CHINA Tel: 0631- 5677081 Fax: 0631-5675281
鲁ICP备2024134097号-1 Website: www.whautomation.com E-mail:sales@whautomation.com
